Shenzhen EUBO New Material Technology Co., Ltd Welcome you!
1. EUBO C403 Grease
· Physical Properties:

EUBO C403 grease is made by medium viscosity PAO. The product is a long-term lubricant which contains a solid lubricant, fully synthetic, high temperature resistant. It is suitable for high temperature bearing long-term lubrication (Temperature is 180℃, limit temperature can reach 220℃). This product uses the high quality raw materials precisely modulate, imported by the independent intellectual property rights formula. Through the test of EUBO R & D Center and the practical application evaluation of customers, this product has excellent thermal stability、high temperature sealing 、 long-term lubrication 、excellent mechanical stability and a wide operating temperature range, so EUBO C403 is apply to the field of high temperature bearing assembly lubrication in low-pressure, medium pressure, high pressure conditions.

· Data:

Index

Measured Value

Test Standards

Appearance

white

——

Penetration (0。1mm)

265~295

GB/T 269-91

Consistency Grade

2

NLGL

Thickener

polyurea

——

Dropping Point(℃)

>250

GB/T 3498-2008

Copper Strip Corrosion

qualified

上海11选5走势图GB/T 5095-85

Base Oil 

synthetic oil

——

Working Temperature Scope (℃)

-40~180

——

· The using scope:

Mill bearing, bearing of heat treatment equipment, rolling bearing exposure to high temperature environment, high temperature operation equipment bearing, and the need for high requirements of sealing equipment etc.

2. EUBO T932
· Physical Properties:

The special bearing oil of EUBO using high-quality synthetic olefin oil as base oil, which with lubrication protection for iron base, copper base and iron copper base oil bearing, and related powder metallurgical structure of related powder metallurgical structure.This product is bean developed for the lubrication characteristics of powder metallurgy oil bearing lubrication, viscosity grade from ISO 15 to ISO 100. Through the trace oil of the oil bearing, reduce friction when direct contact between metal.Make boundary lubrication to fluid lubrication, effectively reduce the friction coefficient, improve the bearing wear resistance and resistance to sintering properties, and extend the life of the product .This product has passed NSF H1 certification, the authentication number is NO. 132716.

· Character :
♦ Evaporation loss is few at high temperature, excellent high temperature oxidation resistance, prolong life of high temperature lubrication.
♦ Low frictional resistance, effectively inhibiting the abnormal temperature rise when produce at work piece high-speed high-load operation, Should reduce the friction noise of the wear parts, reduce the boundary friction,good for the equipment dry start and frequent start.
♦ Excellent extreme pressure performance, can prevent bearing jammed sintering in high load.
♦ Excellent lubrication abrasion resistance and reduce bearing wear, can make the bearing to achieve lifelong lubrication.
♦ This product excellent rust resistance and corrosion resistance to metal substrate, compatible with mineral oil, good applicability to sealing material.
· Data:
Base oil Poly-Alpha-Olefin --
Apperance (Base oil) Aurantius  

cSt Viscosity Index (Base oil) 100℃ 5.8 7.7 10.5 13.6 19.0 25.5 ASTM D445
40℃ 31 46 68 96 149 221
Viscosity Index (Base oil) 133 136 145 144 144 147 ASTM D2270
Pour Point ℃ -51 -48 -48 -45 -45 -42 ASTM D97
Flash Point ℃
237 242 231 228 235 240 ASTM D92
Copper Corrosion
1B 1B 1B 1B 1B 1B ASTM D130
Rust-Preventing Characteristics
合格 合格 合格 合格 合格 合格 ASTM D 665
Specific Gravity 25℃ g/cm3
0.85 0.85 0.86 0.86 0.86  

ASTM D4052
Foam Test ml/ml Seq
0/0, 0/0, 0/0 0/0, 0/0, 0/0  

0/0, 0/0
0/0, 0/0, 0/0 0/0, 0/0, 0/0 0/0, 0/0, 0/0 ASTM D892
Evaporation Loss %
0.5 0.5 0.5 0.3 -- -- ASTM D972
Four Ball Wear Test
(1200rpm、40kg 1H、mm)

0.42 0.42 0.45 0.45 0.45 0.45 ASTM D2266
Extreme-Pressure Properties
of Lubricating Grease (1500rpm,N) (Four-Ball Method)
1569 1569 2452 2452 3089 3089 ASTM D2596
Total acid(mgKOH/g) 0.06 0.06 0.06 0.06 0.06 0.06 ASTM D664
Certification of Complicance Required
ROSH  REACH --
EUBO

Shenzhen eubo new Mstar Technology Ltd as a national high-tech enterprises, high-tech enterprises in Shenzhen City, is located in Shenzhen national hi tech Industrial Development Zone -- the bright new, dedicated to biodegradable environmentally friendly lubricant R & D and products, R & D, production, sales, service in one。 The company has perfect research and development system, and through the lubricant test center approved by CNAS, the introduction of international advanced detection equipment, engineers and technical personnel to absorb and train a number of environmental protection in the field of manufacturing lubricant has the influence, has a number of invention patents and utility model patents, with strong scientific research and technical innovation ability。

   
  (Note: * is required)  
* Name:  
* Hand machine:  
* Email:  
Address:  
* The message content:  
Verification code:  
     
3D之家 上海11选5走势图 3D之家 安徽快3 3D之家 上海11选5官网 上海11选5 上海11选5走势图 上海11选5 上海11选5